Eclipse - Fujitsu Ten CD4000 Turning the power on and off, When power is OFF, press PWR button

Names of controls and parts

Turning the power on and off

When the power is turned ON, the last source mode (such as CD and tuner) used prior to turning OFF the power will be restored.

When the vehicle has no ACC position on the ignition switch, care is needed when turning off the equipment. Follow Step 2 or Step 3 when turning off the power.

When power is OFF, press the

1 [PWR] button.

The power will come ON.

ATTENTION

When the equipment's power is turned on for the first time or if the battery terminals have been disconnected because of vehicle maintenance and the power is then turned back on, the equipment will start up in FM1 mode. After this, the broadcast stations will be searched for automatically and stored in buttons [1] to [6].

When power is ON, press the

2 [PWR] button for less than two seconds.

The power will go OFF and the equipment will be in Standby.

If you press the [PWR] button again for more than one second, the power will go completely off.

When power is ON, press the

3 [PWR] button for more than two seconds.

The power will go completely OFF.

ATTENTION

If a car is not equipped with an ACC position, press the [PWR] button for more than two seconds.

III

13