Yamaha YSP-1100 Adjusting surround mode parameters, 46 En, When DTS Neo6 Music is selected

ENJOYING SURROUND SOUND

Adjusting surround mode parameters

You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect.

5BEAM	ST+3BEAM	3BEAM
1	2	3
STEREO	MY BEAM SURROUND
4	5	6
MUSIC	MOVIE	SPORTS
7	8	9
OFF
0	+10
CH LEVEL		MENU
	ENTER	TV/AV
		YSP
TEST		RETURN

1Repeat steps 1 and 2 in “Enjoying 2-channel sources in surround sound” on page 45 and select PL II Music or Neo:6 Music.

2Press / to select the parameter.

ENTER

3Press / to configure the parameter.

ENTER

■When Dolby Pro Logic II Music is selected

PANORAMA

Gives front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF

Default setting: OFF

DIMENSION

Adjusts the difference in volume between front and surround channels to the volume balance you desire. Control range: –3 (toward the surround direction) to

+3 (toward the front direction) Default setting: STD

CT WIDTH

Distributes the center channel sound to the left and right. If set to 0, center channel sounds output only from the center channel.

Control range: 0 to 7

Default setting: 3

■When DTS Neo:6 Music is selected

C. IMAGE

Adjusts the center image from three channels (front and center) to varying degrees.

Control range: 0.0 (wider) to 1.0 (toward the center)

Default setting: 0.3

46 En