AUTO SETUP (IntelliBeam)

This unit creates a sound field by reflecting sound beams on the walls of your listening room and broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.

This unit employs the beam optimization and sound optimization features with the aid of the supplied optimizer microphone, allowing you to avoid troublesome listening-based setup and achieving highly accurate sound adjustments that best match your listening environment. We call these 2 features “IntelliBeam” generically.

The beam optimization creates the best possible surround sound field without manually setting the parameters for your listening room.

The sound optimization feature performs the following checks and automatically makes appropriate sound adjustments.

DISTANCE:

Checks the distance of each beam from this unit and adjusts the delay of each channel so that each sound beam reaches the listening position at the same time.

EQUALIZING:

Adjusts frequency and levels of each channel’s parametric equalizer to reduce coloration across the channels and create a cohesive sound field. The sound optimization feature incorporates three parameters (frequency, level and Q factor) for each of the seven bands in its parametric equalizer to provide highly precise automatic adjustment of frequency characteristics.

LEVEL:

Checks and adjusts the sound output level of each channel.

The flow chart of AUTO SETUP

This unit performs a series of checks to optimize the beam angle, delay, volume and quality. You can choose to optimize all or part of the parameters.

SETUP

Checking the environment of

your listening room

*1

Optimizing the beam angle

*2 *3

Checking the subwoofer

Optimizing the beam delay,

frequency and volume

Beam optimization

Sound optimization

Notes

*1 The beam angle checking procedure is skipped if SOUND OPTIMZ only is selected.

*2 The sound optimization procedure is skipped if BEAM OPTIMZ only is selected.

*3 The subwoofer checking procedure is skipped if BEAM OPTIMZ only is selected.

English

29 En

Page 33
Image 33
Yamaha YSP-1100 owner manual Flow chart of Auto Setup, 29 En