Yamaha YSP-1100 owner manual 88 En, Remote control

TROUBLESHOOTING

■ Remote control

Problem	Cause	Remedy	See
			page
The remote control does not work	Wrong distance or angle.	The remote control will function within a	24
and/or function properly.		maximum range of 6 m and no more than
		30 degrees off-axis from the front panel.
	Direct sunlight or lighting (from an	Reposition this unit.	—
	inverter type of fluorescent lamp, etc.) is
	striking the remote control sensor of this
	unit.
	The batteries are weak.	Replace all batteries.	24
You cannot operate external	The external component you want to	Press INPUT on the front panel or the	39
components with this unit’s	operate is not selected as the input	input selector buttons on the remote
remote control.	source.	control to select the external component
		you want to operate.
	The remote control code was not	Set the remote control code correctly or	81
	correctly set.	try another code for the same
		manufacturer using the “LIST OF
		REMOTE CONTROL CODES” at the
		end of this manual.
	Even if the remote control code is	Use the remote control supplied with the	—
	correctly set, there are some models that	external component.
	do not respond to the remote control.
The cursor buttons do not work	The operation mode selector was	Set the operation mode selector to YSP.	—
during SET MENU operation.	unwantedly set to TV/AV.
You cannot use the my beam auto-	Wrong distance or angle.	The remote control will function within a	24
adjust function.		maximum range of 6 m and no more than
		30 degrees off-axis from the front panel.

88 En