INSTALLATION

This section describes a suitable installation location to install the unit using a metal wall bracket, a rack or a stand.

Before installing this unit

This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects produced by this unit may not be sufficient when the unit is installed in the following locations.

Rooms with surfaces inadequate for reflecting sound beams

Rooms with acoustically absorbent surfaces

Rooms with measurements outside the following range W (3 to 7 m) x H (2 to 3.5 m) x D (3 to 7 m)

Rooms with less than 1.8 m from the listening position to the speaker positions

Rooms where objects such as furniture are likely to obstruct the path of sound beams

Rooms where the listening position is close to the walls

Rooms where the listening position is not in front of this unit

Make sure you leave an adequate amount of ventilation space so that heat can escape. Make at least 5 cm of space above or below this unit.

Side view

5 cm or more

FrontRear

Side

Notes

We do not recommend installing this unit so that it is positioned directly on the floor of your listening room. Please install this unit using a metal wall bracket, rack or stand.

This unit weighs 9.0 kg. Be sure to install this unit where it will not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV.

This unit is shielded against magnetic rays. However, if the picture on your TV screen becomes blurred or distorted, we recommend moving the speakers away from your TV.

Installing this unit

Install this unit where there are no obstacles such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.

Parallel installation

Install this unit in the exact center of the wall when it is measured from the left and right corners.

An object, such as furniture

Corner installation

Install this unit in the corner at a 40º to 50º angle from the adjacent walls.

40° to 50°

An object, such as furniture

PREPARATION

English

11 En

Page 15
Image 15
Yamaha YSP-1100 owner manual Installation, Before installing this unit, Installing this unit, 11 En