USING THE SLEEP TIMER
Use this feature to automatically set this unit to the standby mode after a specified time period. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source.
Setting the sleep timer
Each time you press SLEEP on the remote control, the front panel display changes as shown below.
SLEEP
AUTO
VOL MODE SETUP INPUTMODE SLEEP
5BEAM ST+3BEAM 3BEAM
1 2 3
STEREO MY BEAM SURROUND
4 5 6
MUSIC MOVIE SPORTS
7 8 9
OFF
0 +10
SLEEP 120min
CH LEVEL | MENU |
TV/AV
ENTER
YSP
TESTRETURN
SLEEP 90min
SLEEP 60min
| SLEEP | 30min |
1 Set the operation mode selector to YSP to | SLEEP | OFF |
switch to the operation mode of this unit.
3 Wait for a few seconds without operating this
TV/AV
YSP
unit to confirm the setting for the sleep timer.
The SLEEP indicator lights up in the front panel display, indicating that the sleep timer is activated.
2Press SLEEP on the remote control repeatedly to set the amount of time for the sleep timer.
Choices: 120min, 90min, 60min, 30min, OFF The SLEEP indicator in the front panel display flashes while switching the amount of time for the sleep timer.
SLEEP
Lights up
SLEEP
SLEEP
Flashes
