■OSD SET (OSD settings)
Use to adjust the display position and the background color of the OSD.
B)OSD SET
. OSD SHIFT;;;;;;;;0
OSD BACK COLOR;;;BLUE
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust towards the – (minus) direction to raise the position of the OSD, and adjust towards the + (plus) direction to lower it. Choices:
Initial setting: 0
OSD BACK COLOR (OSD background color)
Use to select the background color of the OSD. Choices: BLUE, GRAY
■UNIT SET (Unit settings)
Use this to change the display unit of measurement. Choices: METERS (Australia and U.K. models),
FEET (U.S.A. model)
C)UNIT SET
pMETERS | FEET |
[p]/[p]:Select [ENTER]:Return
•Select METERS to input distances in meters.
•Select FEET to input distances in feet.
Note
If you change this setting, the adjusted beam settings may change.
MANUAL SETUP
OPERATION | ADVANCED |
|
|
English
