Using MANUAL SETUP
Use the remote control to access and adjust each parameter.
5BEAM | ST+3BEAM | 3BEAM |
1 | 2 | 3 |
STEREO | MY BEAM SURROUND | |
4 | 5 | 6 |
MUSIC | MOVIE | SPORTS |
7 | 8 | 9 |
OFF |
|
|
0 | +10 |
|
CH LEVEL |
| MENU |
| ENTER | TV/AV |
| YSP | |
|
| |
TEST |
| RETURN |
y
You can adjust the SET MENU parameters while the unit is reproducing sound.
1Set the operation mode selector to YSP to switch to the operation mode of this unit.
TV/AV
YSP
2Press MENU on the remote control.
The SET MENU screen appears on your TV.
SET MENU
. ;MEMORY
MENU;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP
[p]/[p]:Up/Down [ENTER]:Enter
y
•The control buttons used for SET MENU are displayed on the bottom of the screen.
•To return to the previous screen while using SET MENU, press RETURN on the remote control.
•To cancel the SET MENU screen, press MENU once more.
•You can also perform the following operations in the front panel display.
MANUAL SETUP
3Press 
/ 
to select MANUAL SETUP and then press ENTER.
The following screen appears on your TV.
ENTER
ENTER
;MANUAL SETUP
. 1)SOUND MENU
2)BEAM MENU
3)INPUT MENU 4)DISPLAY MENU
[p]/[p]:Up/Down [ENTER]:Enter
4 Press 
/ 
to select a sub menu and then press ENTER.
ENTER
ENTER
5 Press 
/ 
/ 
/ 
and ENTER to configure each parameter.
ENTER
6Press MENU to exit.
The OSD disappears from your TV screen.
MENU
OPERATION | ADVANCED |
|
|
English
