MANUAL SETUP
■INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD and the front panel display. Press an input selector button (TV, STB, DVD, VCR, or AUX) to select the component you want to change the name for and then perform the following procedure.
DISPLAY MENU
Use to manually adjust various parameters related to the display.
SET MENU → MANUAL SETUP → DISPLAY MENU
D)INPUT RENAME | 4 DISPLAY MENU | |
|
| . A)DIMMER SET |
DVD | DVD | B)OSD SET |
|
| C)UNIT SET |
[p]/[p]:Position | [p]/[p]:Up/Down | |
[p]/[p]:Character | [ENTER]:Enter | |
[ENTER]:Return
1Press 
/ 
to place the _ (underbar) under the space or the character you want to edit.
The _ (underbar) flashes.
ENTER
■DIMMER SET (Dimmer settings)
Use to adjust the brightness of the front panel display.
A)DIMMER SET
. STANDARD DIMMER;;;;;OFF
AUTO DIMMER
;;;;;;;;;;;;;OFF
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
2Press 
/ 
to select the desired character.
•You can use up to 8 characters for each input.
•Press 
to change the character in the following order or press 
to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *, +, etc.
ENTER
STANDARD DIMMER (Standard dimmer)
Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control.
Choices:
AUTO DIMMER (Auto dimmer)
If no operation is performed for a specified period, the front panel display dims. Use to adjust the brightness of the front panel display in this case.
Choices: OFF (the same brightness as the STANDARD DIMMER setting),
3Repeat steps 1 to 3 to rename each input.
4Press ENTER to exit.
The new names are registered, and the display returns to the previous screen.
ENTER
