Yamaha YSP-1100 owner manual Bsubwoofer SET, Cmute Level, Daudio Delay, Eroom EQ, 67 En

■SUBWOOFER SET (Subwoofer set)

Use to manually adjust various subwoofer settings.

B)SUBWOOFER SET

. BASS OUT;;;;;FRONT

CROSS OVER;;;100Hz

LFE LEVEL;;;;;;0dB

DISTANCE;;;;;;3.0m

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

BASS OUT (Bass out)

Low-frequency (bass) signals can be directed to the subwoofer and/or the front left and right channels. This setting also determines the routing of LFE (low-frequency effect) signals found in Dolby Digital or DTS sources. Choices: SWFR (subwoofer), FRONT

•Select SWFR if you connect a subwoofer. LFE and low-frequency signals from other channels are directed to the subwoofer.

•Select FRONT if you do not use a subwoofer. LFE and low-frequency signals from other channels are directed to the front left and right channels.

CROSS OVER (Cross over)

When BASS OUT is set to SWFR, you can use this feature to select a cross-over (cut-off) frequency for all low-frequency signals. All frequencies below the selected frequency will be sent to the subwoofer speaker position. Choices: 80Hz, 100Hz, 120Hz

LFE LEVEL (Low-frequency effect level)

Select to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals.

Choices: –20 to 0 dB

DISTANCE (Distance)

Select to adjust the distance of the subwoofer from the listening position.

Choices: 0.3 to 15.0 m

Initial setting: 3.0 m

MANUAL SETUP

■MUTE LEVEL (Muting level)

Use to adjust how much the mute function reduces the volume level.

Choices: MUTE, –20 dB

•Select MUTE to completely halt all sound output.

•Select –20 dB to reduce the current volume level by 20 dB.

C)MUTE LEVEL

pMUTE -20dB

[p]/[p]:Select [ENTER]:Return

■AUDIO DELAY (Audio delay)

Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

Choices: 0 to 160 msec

D)AUDIO DELAY

AUDIO DELAY;;;;;0msec

[p]/[p]:Select [ENTER]:Return

■ROOM EQ (Room equalizer)

Use to change the tonal qualities of your listening room when the unit is mounted on the wall.

Choices: MOUNTING (Mount type), REFLECTING (Reflectivity type)

E)ROOM EQ

. MOUNTING;;;;;SHELF REFLECTING;;;NORMAL

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

MOUNTING (Mount type)

Use to enhance medium to low range sounds. Choices: WALL (Wall mount), SHELF (Shelf mount)

•Select WALL if this unit is mounted on the wall in your listening room.

•Select SHELF if this unit is mounted on the shelf in your listening room.

REFLECTING (Reflectivity type)

Use to select the reflectivity of your listening room. Choices: NORMAL (Normal), HI ECHO (High echo)

•Select NORMAL if your listening room has a normal reflectivity.

•Select HI ECHO if your listening room has highly

reflective surfaces such as concrete walls.

OPERATION ADVANCED

English

67 En