Denon DJ DN-X1700 owner manual Fader setting the fader curve, How to adjust the Crossfader torque

Getting Started Connections Basic Operations Effector Function Fader Start USB Utility Specifications Troubleshooting

FADER (setting the fader curve)

1When the CH FADER CONTOUR control is turned counterclockwise, the curve will have characteristics that rise gradually; conversely, when it is turned clockwise, it will have characteristics that rise sharply. At the center position, curve characteristics between the two will be produced.

* The same curve characteristics apply to channels 1 to 4.Channel Fader

2When the CH FADER CONTOUR control is turned counterclockwise, the curve will have characteristics that will rise gradually; conversely, when it is turned clockwise, it will have characteristics that rise sharply, and cut-in and cut-out operations will be performed.

At the center position, curve characteristics between the two will be produced.Crossfader

How to adjust the Crossfader torque

1Remove the rubber cap of the front panel.

2 Move the Crossfader to the far right until the screw head becomes visible.

3Insert a screwdriver, and adjust the sliding torque. When the screw is turned clockwise: The sliding torque is increased so that the Crossfader moves more stiffly. When the screw is turned counterclockwise: The sliding torque is decreased so that the Crossfader moves more easily.

4 Put the rubber cap of the front panel back in its place.

NOTE

•The Crossfader has a high-precision construction: As such, tightening the screw with too much force or loosening it excessively may result in damage or adversely affect performance.

12