Getting Started Connections Basic Operations Effector Function Fader Start USB Utility Specifications Troubleshooting
MIDI
This unit comes with USB MIDI input/output and
These functions support the MIDI control functions of almost all the controls as well as the MIDI clock.
Setting the MIDI channels
1Press the UTILITY/–USB A/USB B button.
2Setting 
MIDI INPUT CH or MIDI OUTPUT CH. Set the MIDI channels.Using the EFX SELECT control (EFX2), select MIDI
Setting the MIDI clock
Using the EFX SELECT control (EFX2), output the MIDI clock which is synchronized with the BPM value set. (60 to 300 BPM)
1Press the MIDI CLOCK START/STOP button.
2MIDI output terminals. The LED in the MIDI CLOCK START/STOP button lights.The MIDI clock is output from the USB MIDI and
MIDI layer operations
The unit incorporates a MIDI layer function for the input channels. This function controls the external devices and software as the MIDI controller.
1rings light up blue, and the MIDI layer operations are performed.Press the MIDI layer selector buttons. The EQ control
2using the panel controls are output. The operation are not reflected in the
received, and the LEDs light up or go off.
• MIDI output operation blockThe MIDI commands corresponding to the operations
Channel isolator EQ (HI, MID, LOW) controls; channel EFX SEND 1, 2 buttons; CUE buttons; Channel Fader
• MIDI input operation block
The channel level meter; channel EFX SEND 1, 2 buttons; CUE button display
3again, the EQ control rings change to amber, and the MIDI layer operations are ended. The operations are
reflected in the
4the positions of the channel isolator EQ controls (HI, MID, LOW) and Channel Fader differ from the internal statuses of the
the controls. While these statuses are locked, the EQ control rings flash.If, at the completion of the MIDI layer operations,
When a control whose status is locked is operated,
5 the lock screen appears, and the lock icon and lock position (red line) are displayed.
6lock is released, and the operations are reflected in the
14
