Sony SLV-SF900G manual Connection to your TV and Set-Top Box STB, If you don’t use a STB, skip to

Connection to your TV and Set-Top Box (STB)

If you don’t use a STB, skip to page 15.

If your STB has a Scart (EURO-AV) connector

The illustration below shows an example of connecting the STB to LINE-3 IN.

Scart cable (supplied with the STB)

Scart (EURO-AV)

AERIAL

INSTB

iLINE-	tLINE
1 (TV)	- 3 IN	AERIAL
		OUT

AERIAL IN

Aerial cable (supplied)

Scart

(EURO-AV)

Scart cable (not supplied)

: Signal flow

Getting Started

You can watch programmes from the Set-Top Box connected to this VCR on your TV even when the VCR is turned off using the Line Through function. When you turn on the STB, this VCR automatically sends the signal from the STB to the TV without turning itself on.

1

2

3

Connect the STB to the LINE-3IN connector as shown above.

Set POWER SAVE to OFF in the OTHER OPTIONS menu.

Turn off the VCR.

To watch a programme from the STB, turn on the STB and the TV.

Note

•You cannot watch programmes from your STB on the TV while recording unless you record a programme from your STB.

continued

Connecting the VCR

13