Sony SLV-SF900G manual To check the information of a registered programme, Recording time Tips

To check the information of a registered programme

Press SMARTFILE.

The SmartFile search list appears. The registered programme number, registration date and recording time appear in this list. Note that the registration date differs from the recorded date.

Registration date

Programme located in a recorded tape

Estimated position of the registered programme

		PAGE 1
MY VIDEO TAPE		SP 1H 55M
15 . 11	PROGRAM NO.11
		SP 0H 30M
15 . 11	PROGRAM NO.10
		LP 2H 00M
15 . 11	PROGRAM NO. 9
		SP 0H 45M
START		END

SELECT :

SEARCH : OK

EXIT : MENU

Recording time

Tips

•The programmes recorded on the tape can be registered again in a SmartFile label that already contains programme data. However, the recorded date and time, programme name and information input manually (such as the programme label and category) are replaced with "PROGRAM NO. XX".

•If the SmartFile label contains stored programme data that includes protected programmes, a message appears and the registration stops.

Notes

•Programme data is not registered correctly in the SmartFile label when :

–the programme length is about 20 minutes or less in LP mode or about 11 minutes in SP mode.

–the programme does not have an index signal or the index signal has been recorded over and erased.

–the tape is damaged or dirty.

•If you don’t set the clock or the clock isn’t set to the correct date, the registration date won’t be stored correctly on the SmartFile list.

•After you press SMARTFILE GENERATOR and start registration, registration is interrupted if you press x STOP, H PLAY, M FF, m REW, ?/1 or ./> INDEX SEARCH. In these cases as well, the data registered up to the point when registration was interrupted remains in the SmartFile label.

•When you set AUTO LONG PLAY to ON in the TAPE OPTIONS menu, and the tape speed automatically changes from SP to LP during recording, the VCR displays the entire recording time converted to SP mode in the SmartFile list.

•The estimated position of the registered programmes may not be correct if many short programmes are recorded on long tapes.

SmartFile function

Registering the contents of a recorded tape in the SmartFile label

89