Sony SLV-SF900G manual To stop registration to the SmartFile label, Press Smartfile Generator

Registering the contents of a recorded tape in the SmartFile label

The VCR will register programmes recorded on a tape (even a non-SmartFile recorded tape) in the memory of a new SmartFile label by detecting the index

signals indicating the start of recorded	g
programmes. You can register up to the 12th
programme from the start of the tape. The
programmes appear from the bottom of the	SMARTFILE GENERATOR
screen as PROGRAM NO. 1, PROGRAM
NO.2, ... PROGRAM NO.12 in this order.
The 13th and subsequent programmes are
ignored. You can manually name the
registered programme numbers and select
the category (see page 80).

Before you start…

•Turn on your TV and set it to the video channel.

•Turn on your VCR.

1 Attach the SmartFile label to the spine of the cassette as shown on the right and insert the tape.

SMARTFILE SENSOR

2 Press the SMARTFILE GENERATOR button on the VCR.

A message appears indicating that the recorded programmes are being registered. The index signals are detected from the start of the tape, and the registration stops when the end of the tape is reached. The message disappears when registration is complete.

To stop registration to the SmartFile label

Press SMARTFILE GENERATOR.

2 . 8 . 00 - 10 . 10 . 00		PAGE 1
	SMARTFILE INDEXING IS
	IN PROGRESS
START		END

The data registered before the button is pressed remains in the SmartFile label. You can register the programmes again by pressing SMARTFILE GENERATOR again.

88

Registering the contents of a recorded tape in the SmartFile label