Sony SLV-SF900G manual Code numbers of controllable TVs, Manufacturer Code number

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

To switch to wide mode, see the footnotes below this table for the applicable code numbers.

Manufacturer	Code number
Sony	01*1, 02
Akai	68
Blaupunkt	10
C.G.M	09
Ferguson	52
Goldstar	03, 04, 17
Grundig	10*1, 11*1
Hitachi	24
ITT	15, 16, 69*3
JVC	33
Loewe	45
Mivar	09

Manufacturer	Code number
NEC	66
Nokia	15, 16, 69*3
Panasonic	17*1, 49
Philips	06*1, 07*1, 08*1
Saba	12, 13
Samsung	22, 23
Sanyo	25
Sharp	29
Thomson	43*2
Toshiba	38

*1

*2

*3

Press WIDE to switch to the wide picture mode you want.

Press WIDE, then press 2 +/– to select the wide picture mode you want.

Press WIDE. The menu appears on the TV screen.Then, press M/m/</, to select the wide picture you want and press OK.

Notes

•If the TV uses a different remote control system from the one programmed to work with the VCR, you cannot control your TV with the remote commander.

•If you enter a new code number, the code number previously entered will be erased.

•If you remove the batteries of the remote commander for more than a few minutes, the code number may be reset to 01 (Sony). In this case, reset the appropriate code number.

8

Setting up the remote commander