Onkyo CR-B8 Using the Timer Functions-Continued, Using the Sleep Timer, Canceling Sleep Timer

CRB8.book 46 ページ ２００５年８月１８日 木曜日 午後６時４０分

Using the Timer Functions—Continued

Using the Sleep Timer

Using the remote controller

The Sleep timer can be set for 10 to 90 minutes, in inter- vals of 10 minutes.

SLEEP

Press SLEEP.

“Sleep 90” appears in the display, indi- cating the unit will turn off in 90 minutes. Each press of the same button reduces the remaining time by 10 minutes.

SLEEP

Press / if you wish to set the remaining time in one-minute incre- ments.

The SLEEP indicator appears on the dis- play when the sleep timer has been set. The specified sleep time appears on the display for about eight seconds, then the previous display reappears.

Checking the Remaining Time

Press SLEEP while the Sleep timer is on. If you press SLEEP while the remaining time is displayed, the remaining time is reduced by 10 minutes.

Canceling Sleep Timer

Press SLEEP repeatedly until “Sleep Off” appears in the display.

Using the unit

You can set the Sleep timer for 10 to 90 minutes, in inter- vals of 10 minutes. It is also possible to set the timer from 1 to 99 in one-minute increments is also possible using

MULTI JOG.

Display

1, 2 3, 4

1	Press and hold TIMER for more
	than one second.
	“Sleep 90” appears in the display win-
	dow. The unit will turn off in 90 minutes.
2	Press TIMER if you wish to reduce
	the remaining time.
	Each press reduces the remaining time
	by ten minutes:
	90→80→...→10→off.
		SLEEP
3	Turn MULTI JOG if you wish to set
	the remaining time in one-minute
	increments.
	Turn MULTI JOG clockwise to increase
	the remaining time by up to 99 minutes,
	or counterclockwise to decrease the
	remaining time to one minute.
		SLEEP
	The SLEEP indicator appears on the dis-
	play when the sleep timer has been set.
	The specified sleep time appears on the
	display for about eight seconds, then the
	previous display reappears.

46