CRB8.book 34 ページ ２００５年８月１８日 木曜日 午後６時４０分
Programming Radio Stations
Programming FM/AM Stations One by One – Preset Write
You can store the frequencies of stations one by one manually into the preset memory channels. This is useful when you want to program the stations in your favorite order.
In addition to this method, FM has “Auto Preset” mode to store frequencies automatically.
Display |
1 |
2 |
3 |
Before auto presetting
•You can preset up to 30 channels including both FM and AM stations. For example, if you have already stored FM stations to eight chan- nels, you can use 22 channels to store preset AM stations.
•Programmed FM and AM stations are indi- cated separately. Therefore, one of the preset FM stations and one of the preset AM stations could use the same channel number.
•The Preset Write function enables you to store radio station frequencies to any channel num- ber. For example, you could program three AM stations to channels 2, 5, and 9.
Turn on the power to the unit before you start the procedure.
1
2
3
Press INPUT 
/ 
to display “AM.”
SOURCE
Press again to select “FM” to store an FM station.
Press | / | to tune in the radio |
station you wish to preset.
SOURCE
If you hold down either of the buttons, the frequency keeps changing.
Press EDIT/NO/CLEAR and turn MULTI JOG until “Preset Write?” appears in the display.
4
5
6
Press MULTI JOG.
SOURCE
The channel number to be preset flashes. To cancel presetting, press EDIT/NO/ CLEAR instead.
If you wish to change the channel number, turn MULTI JOG.
SOURCE
Press MUTLI JOG to confirm.
If “Complete” appears
The radio station is registered to the pre- set channel.
34
