CRB8.book 44 ページ 2005年8月18日 木曜日 午後6時40分
Setting the Clock
You can select either the
|
| Using the remote controller |
| |
Display |
| 1 |
| |
|
|
| ||
STANDBY/ON |
|
| CLOCK CALL | |
|
| DISPLAY | ||
|
| Number buttons | ||
DISPLAY |
| EDIT/ | ||
button |
|
| NO/CLEAR | |
|
|
| ||
| EDIT/ |
|
| |
| NO/CLEAR | 3, 5 | 2, 4, 6 | |
1 | ||||
|
|
1
2
3
4
5
44
Press TIMER repeatedly until “Clock” appears in the display.
Press MULTI JOG.
You can now set the day of the week.
Turn MULTI JOG to select the cur- rent day of the week.
SUN - Sunday THU - Thursday
MON - Monday FRI - Friday
TUE - Tuesday SAT - Saturday
WED - Wednesday
Press MULTI JOG to confirm the setting.
You can now set the time.
Turn MULTI JOG to set the current time.
You can also use the number buttons on the remote controller.
To switch between the am and pm indica- tors, press the >10 button on the remote controller.
6 | Press MULTI JOG to start the |
| |
| clock. |
You can also use the ENTER button on the remote controller.
It can be helpful to synchronize with an accurate time source.
The clock starts operating and a dot indi- cating seconds starts to flash.
To cancel the clock setting
Press EDIT/NO/CLEAR.
Checking the Time and the Day of the Week
To check the time and the day of the week, press CLOCK CALL on the remote controller.
The clock appears for eight seconds in Standby mode.
To Switch between the 12-hour and 24-hour Displays
Press DISPLAY while the current time is indicated on the display.
Turning the Current Time Display On or Off while the Unit is in Standby Mode
First turn on the power to the unit, then press and hold down the STANDBY/ON button on the unit for more than two seconds.
Displaying the current time in Standby mode consumes more power than not displaying the current time.