Onkyo CR-B8 Selecting MP3 Tracks in All Group Mode, Playing a CD-Continued, group, go to Step

CRB8.book 27 ページ ２００５年８月１８日 木曜日 午後６時４０分

Playing a CD—Continued

Selecting MP3 Tracks in All Group Mode

1, 3

2-4

With All Group mode you don’t have to navigate the group hierarchy to find an MP3 track because all groups that contain MP3 tracks appear at the same level.

If in Random mode, press YES/MODE to switch to Nor- mal mode.

1	While playback is stopped, press
	GROUP.
	The CD receiver enters All Group
	mode and the name of the first group
	appears on the display.
			C D
				MP3
		GROUP			GROUP NAME
2	Use MULTI JOG to select a group.
	You can select any of the groups on the
	disc that contain MP3 tracks.
	To play the first track of the selected
	group, go to Step 4.
3	To access the tracks inside the
	group, press GROUP.
	The name of the first track inside the
	group appears on the display.
	Use MULTI JOG to select the tracks in
	that group.
			C D
				MP3
		GROUP			TRACK NAME
			TRACK

To select another group, press GROUP again, and then turn MULTI JOG.

4	Press MULTI JOG or press .
	Playback starts.

If you want to operate the control during playback, press GROUP and select a group by using MULTI JOG, and then press it.

Playback is switched to the group, now you can select any track by using MULTI JOG.

■Pausing the Selected Track

To pause the selected track, press . To resume playback, press .

■Cancelling Navigation or All Group mode

To cancel Navigation mode or All Group mode while selecting MP3 tracks, press .

■Selecting MP3 Groups & Tracks by Number

1Press GROUP to enter the All Group mode.

2Press the number buttons as described in the examples below to play back the desired group.

The group to play Press

8

10

34

represents the tens digit.

The group with the specified number starts playback. If you have operated the above mentioned control during playback, press ENTER.

3Press the number buttons to enter the track number.

Playback starts automatically.

If the group contains 100 or more tracks, single- and double-digit track numbers must be preceded with zeros. For example, to enter track number 32, press >10, 0, 3, and then 2.

Using the remote controller

Number buttons

1, 3

2, 3 4

27