Onkyo CR-B8 Using the Timer Functions, About the Timers, About the Sleep Timer, Timer indicators

CRB8.book 45 ページ ２００５年８月１８日 木曜日 午後６時４０分

Using the Timer Functions

The CD receiver features three timer functions: Sleep, Once, and Every timer.

About the Timers

Selecting a timer number

You can set up to four timers.

Timer operation types

•Timer Play: The specified component starts playback at the specified time.

•Timer Rec: The specified component starts recording at the specified time.

•The Timer Rec operation is available for recording on

an Onkyo cassette tape deck that features an con- nector connected to the CD receiver. Select the correct input source.

Selecting media for timer operation

You can select AM, FM or CD on the CD receiver, or a DVD or CDR on a connected Onkyo component, or a connected external component that features a Timer function. (You must set the devices so that the compo- nent name is displayed correctly on the CD receiver.) For the Timer Rec operation, you can select AM, FM, or an external component that is connected to the LINE connector and features the Timer function.

Selecting the day(s) of the week

The Once timer operates only one time. The Every timer operates at the specified time on the specified day(s) of every week. For the Every timer, you can select any con- secutive days of the week, such as everyday, every Mon- day through Friday, or every Saturday and Sunday.

i.e.,

Timer 1: Used as an alarm clock every morning.

Timer Play — Every — Everyday — 7:00-7:30 Timer 2: Records a radio program every week.

Timer Rec — Every — MON - SAT — 15:10- 15:30

Timer 3: Records a radio program only this Sunday. Timer Rec — Once — SUN — 10:00-12:00

Notes:

•You cannot change the clock or the end time of the timer operation during Timer playback or recording.

•You cannot use the Timer function unless the clock is set. Be sure to set the clock first.

•If you program a timer on a connected external com- ponent, be sure to connect the component correctly and securely. You cannot use timer playback or recording with incomplete connection.

•During the Timer Rec operation, the muting function is activated and the audio level is minimized. To listen to the audio being recorded, press MUTING on the remote controller.

Timer indicators

TIMER

1

If any of the timers is set, the TIMER indicator lights up. If a number indicator is lit, the corresponding timer has been programmed. If the number indicator is inside a square, the Timer Rec operation is programmed.

If the programmed time overlaps with another timer setting

•The timer with the earlier On time is enabled.

•If both timers start at the same time, the timer with the lower number is enabled.

Timer 1	9:00 - 10:00
Timer 2	8:00 - 10:00
			This timer (with the earlier On time) is
			enabled.
Timer 3	12:00 - 13:00
		This timer (with the lower number) is
		enabled.
Timer 4	12:00 - 12:30

About the Sleep Timer

When the Sleep timer is set, the unit is placed in Standby mode at the specified time.

45