Onkyo CR-B8 Switching the Timer On and Off, Viewing the Timer Settings, the desired timer number

CRB8.book 50 ページ ２００５年８月１８日 木曜日 午後６時４０分

Using the Timer Functions—Continued

Switching the Timer On and Off

•You can use this function to cancel or resume the pro- grammed timer operation.

•You cannot program the timers unless the clock is set.

Display
1	2

1	Repeatedly pressTIMER to display
	the desired timer number.

If the timer number is lit, the correspond- ing timer has been programmed.

2	Turn MULTI JOG to switch the
	timer on or off.

1

or

After the timer is switched on or off, the unit displays the previous screen.

Tip:

You can also perform the operation by using the TIMER

button and / button on the remote controller.

Viewing the Timer Settings

Display
1	1, 2

1	Repeatedly pressTIMER to display
	the desired timer number, then
	press MULTI JOG.

2	Press MULTI JOG to view the sub-
	sequent timer settings.

Repeatedly pressing MULTI JOG enables you to view the subsequent set- tings.

Notes:

•You can change the settings by turning

MULTI JOG.

•If the timer is turned off and you change the settings, the timer is auto- matically turned on.

Check all the settings. If you do not change any settings, the unit returns to the previous display.

To return to the previous display, press EDIT/NO/CLEAR.

Tip:

You can also perform the operation by using the TIMER, ENTER and EDIT/NO/CLEAR buttons on the remote controller.

50