Samsung SHR-5082P PRESET VIEW, OTHER VIEW, Pan, Pel, VIEW, VIEW, ENTER, Preset, Samsung, 40_ PTZ camera control, PTZ TELE WIDE VIEW PRESET, PTZ TELE WIDE VIEW PRESET

PRESET VIEW

The preset setup allows you to move to a preset position using the PTZ camera.

Press the VIEW button on the front panel or remote control in Single Screen PTZ Camera Control Mode to select Preset.

PTZ TELE WIDE VIEW PRESET

Preset Auto Pan Scan Pattern Exit

(Example: Samsung Protocol)

Scroll down the cursor until it reaches the preset position that you want and you can check it from the screen to the right.

No.	Position Name
1

2

3

4

5

6

7

8

Prev Next Exit

OTHER VIEW

Press the VIEW button on the front panel or remote control in Single Screen PTZ Camera Control Mode to use other viewing controls.

Samsung, Pan., Pel.-P, and Pel.-D protocol PTZ cameras support the following operations:

Samsung: Auto Pan/Scan/PatternPan.: Auto Pan/Sequence/SortPel.(P,D): Auto Scan/Frame Scan/ Pattern40_ PTZ camera control

PTZ TELE WIDE VIEW PRESET

Preset Auto Pan Scan Pattern EXIT

Samsung

Preset Auto Pan Sequence Sort EXIT

Pan.

Preset Auto Scan Frame Scan Pattern EXIT

Pel.

After you select an operation, press the ENTER button. Then the selected operation is marked and starts moving. If you select the other operation during operation, the previous operation is unchecked and the selected operation is marked.

Preset Auto Pan Scan Pattern Exit

(For example, Samsung Protocol)

If you perform PTZ operations while an operation is in progress, or enter the Preset Setup or Camera Menu Setup mode, the current operation is stopped and unchecked.

Even though the system is restarted during operation, the set operation starts and remains marked.