-Web Viewer Port Setting

You can configure the port number for Web Viewer.

Viewer Setup

Click Viewer Setup for configuring the Smart Viewer related settings. This Viewer Setup consists of 5 different items: Video Recording, File Converting, Sequence Time, OSD Display, and Auto Connection.

1

 

2

 

3

4

5

6

7

8

 

 

1.The currently displayed video data can be saved in a DVR format (*.dvr) file. The related settings are made here.

2.A DVR file can be converted into a JPEG or AVI file. The destination folders are determined here.

3.You can set the sequence time (or screen change time) interval for the auto sequence mode.

4.The OSD display on Smart Viewer can be decided here.

5.You can decide whether Smart Viewer automatically connects to the designated DVR or site when it starts running.

6.You can enable/disable alarming and set the alarming duration.7.You can set the port for callback connection.8.You can set the language for display.
Video Recording-Naming convention

When recording the currently displayed video data into DVR files, you can assign the file naming rule to DVR files.

- LocationSet the directory for saving the DVR files. - Recording Time

You can set the maximum recording time when saving the video data. You can set the time ranging from 1 to 10 minutes. If the recording time exceeds the preset value, the program stops recording.

File Converting

You can convert a DVR file saved on your PC into JPEG or AVI. The default destination folder for file conversion is < Smart Viewer directory>\ frame.” You can change it on your own.

Sequence Time

In monitoring mode, when the screen change (auto sequence) mode is active, the camera channels change at an interval of this time. You can set the time ranging from 5 to 30 seconds.

OSD Display

You can set if OSD shall be displayed on each channel of Smart Viewer. However, Audio icon will not be affected by the OSD condition.

Callback ConnectionSet the port for callback connection.Smart Viewer _55

VIEWER SMART 10