Percent Oxygen Analyzer | Installation | |
|
|
|
Installation
Installation of the analyzer includes:
1.Unpacking the system.
2.Mounting the control unit.
3.Installing the probe.
4.Making electrical connections.
5.Testing the installation.
CAUTION: READ THIS CHAPTER IN ITS ENTIRETY BEFORE INSTALLING THE SYSTEM.
FOR INDOOR USE ONLY.
3.1 Unpacking the Analyzer
As soon as you receive the instrument, carefully unpack and inspect the control unit, and any included accessories for damage. Immediately report any damage to the shipping agent. The analyzer is shipped with all the materials you need to install and prepare the system for operation.
3.2 Control Unit Installation
The 9060L control unit is designed to be panel mounted in a general purpose, indoor area, away from moisture and the elements. The unit should be installed at viewing level in a sheltered area.
Refer to the Outline Diagram
3.3 9060L Oxygen Probe Installation
To install the probe, weld a BSP or NPT socket to the flue in a suitable position for flue gas sensing. For the correct size of socket refer to probe specifications located in the Appendix.
Teledyne Analytical Instruments | 23 |
