Channel Vision Intercom Systems DP-XXXX - Features, Installation, and Compatibility

Channel Vision Compatible (DP-xxxx)

Channel Vision’s DP-0xxx does not come with a camera, but the DP-5xxx & DP-6xxx Series door plates come with mini cameras which attach to the integrated camera mount. The DP-5xxx contains a Black & White camera, while the DP-6xxx contains a color camera. The DP-0xxx, DP-5xxx, and DP- 6xxx all interface with the Channel Vision’s telephone entry controllers: TE110, C-0920, P-0920 and P-0921 to provide audio and video communication with the front door.

From Telephone

Service Provider

CO Input		Chime	Unlock	Intercom	Power	Phones
			Door
				Ring
			Strike		12VAC
			Active	Intercom
#	1 2	3		Active
or CO rng	Strike
* No 3/5	Time	Model		CHANNEL
		P-0920			TM
				PROVISION
		TELEPHONE ENTRY CONTROLLER
CO Input				Telephones

Camera Power

Connect to the

terminals marked

“TO SYS”

12VAC

500mA

House

Telephones

2-Conductor Power

Supply Extension

(not included)

To Monitor or

BNC Video Connector

Video Distribution

Coax Extension

(not included)

Installation:

hInstall a compatible mounting box at the desired location, such as: DP-Rbox-II flush mount box, DP-9001 surface mount box, or DP-9002 surface mount box.

hUsing a 2-conductor wire, connect the Telephone Entry Controller to the empty screw terminal block on the DP (see diagram).

hIf necessary, attach the camera’s video output to a coax extension that is long enough to reach your monitor or video distribution equipment.

hIf necessary, cut the connector off of the end of the power supply and splice in an extension using crimp-on connectors.

8