Channel Vision DP-XXXXC, DP-XXXXP manual Channel Vision CAT5 Intercom Compatible DP-xxxxC, ST-2000

Channel Vision CAT5 Intercom Compatible

(DP-xxxxC)

The diagram below shows how to connect the DP-xxxxC to Channel Vision’s CAT5 Whole-House Intercom system. When the button is pressed on the DP- xxxxC the ST-2000 Intercom Stations will generate a door chime. Pressing Answer/End will open communication with the DP-xxxxC. Model DP-6xxxC includes a color camera, model DP-5xxxC includes a Black & White camera, and DP-0xxxC includes no camera.

DP-xxxxC

These terminals can be used to connect a C5IDS Door Strike Relay Module

ST-2000

		Room 1
		Room 2
		Room 3
Monitor	Page	Room 4
		Room 5
DND	Answer/End
		Room 6

Press here to answer door

BNC Video

Connector

Coax Extension (not included)

500ft.
	max
				P-0930
		Hub
	A
	B
Link C								Link
In	D	Room 1	Room 2	Room 3	Room 4	Room 5	Room 6	Out
		Model		CHANNEL
		P-0930		PROVISION		Whole-House Intercom
	Page Trigger
					IR		Power
		Page Out			Emitters		+15VDC

2-Conductor power	To Monitor or
Supply Extension	Video Distribution
(not included)
	Camera Power

Installation:

hInstall a compatible mounting box at the desired location, such as: DP-Rbox-II flush mount box, DP-9001 surface mount box, or DP-9002 surface mount box.

hUsing CAT5 wire, connect the P-0930 to the 110 connector on the DP (see diagram).

hIf necessary, attach the camera’s video output to a coax extension that is long enough to reach your monitor or video distribution equipment.

hIf necessary, cut the connector off of the end of the power supply and

10splice in an extension using crimp-on connectors.