JVC RX-5001VGD manual Specifications, Amplifier, Audio, Video

English

Specifications

Amplifier

Output Power

At Stereo operation: 100 W per channel, min. RMS, both channels driven into 8 Ω at 1 kHz, with no more than 0.9% total harmonic distortion. (IEC268-3/DIN)

At Surround operation:

Front Channel:	70 W per channel, min. RMS, driven into
	8 Ω at 1 kHz, with no more than 0.8% total
	harmonic distortion.
Center channel:	70 W, min. RMS, driven into 8 Ω at 1 kHz,
	with no more than 0.8% total harmonic
	distortion.
Rear channel:	70 W per channel, min. RMS, driven into
	8 Ω at 1 kHz, with no more than 0.8% total
	harmonic distortion.

Total Harmonic Distortion (8 Ω, 1 kHz):

0.8%* at 100 W output

(* Measured by JVC Audio Analysis

System)

Audio

Audio Input Sensitivity/Impedance (1 kHz): PHONO (MM): 2.7 mV/47 k Ω

CD, TAPE/MD, VCR, DVD:

220 mV/47 k Ω

Audio Output Level: TAPE/MD, VCR 220 mV

Signal-to-Noise Ratio (’66 IHF/DIN):

PHONO:70 dB/66 dB CD, TAPE/MD, VCR, DVD:

87 dB/67 dB

Frequency Response (8 Ω):

PHONO:20 Hz to 20 kHz (±1 dB) CD, TAPE/MD, VCR, DVD:

20 Hz to 20 kHz (±1 dB)

RIAA Phono Equalization: ±1.0 dB (20 Hz to 20 kHz)

Video

Video Input Sensitivity/Impedance:

VCR, DVD: 1V(p-p)/75 Ω

Video Output Level:

VCR, MONITOR OUT: 1V(p-p)/75 Ω

Synchronization: Negative

Signal-to-Noise Ratio: 45 dB

25