JVC RX-5001VGD manual English, Adjusting the 3D-PHONICModes, Adjusting the DAP Modes

English

Adjusting the 3D-PHONIC Modes

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 11).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Adjusting the DAP Modes

Before you start, remember...

• Make sure that you have set the speaker information correctly

(see page 11).

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

• You can only adjust the rear speaker output level when you have

On the front panel:

1. Press SURROUND repeatedly until “3DACTION” or “3DTHEATR” appears on the display.

SURROUND

connected the rear speakers and have set “REAR SPK” to “YES”

(see page 11).

On the front panel:

1. Press SURROUND repeatedly

The 3D-PHONIC and PRO LOGIC indicators also light up on the display.

SURROUND

until the DAP mode — DANCE

CLUB, LIVE CLUB, HALL, or

2.Press ADJUST so that MULTI CURSOR %/ Þ/ @/ #buttons work for adjusting the surround setting.

3.Press MULTI CURSOR %/ Þ repeatedly until “–EFFECT+” appears on the display.

ADJUST

MULTI CURSOR

PAVILION — appears on the
display.
The DAP indicator also lights up on the display.
2. Press ADJUST so that MULTI	ADJUST
CURSOR %/ Þ/ @/ #buttons
work for adjusting the DSP
setting.
3. Press MULTI CURSOR %/ Þ	MULTI CURSOR

MULTI CURSOR

4.Press MULTI CURSOR @/ #to select an effect level you want.

•Each time you press the button, the effect level changes as follows:

EFFECT 1 EFFECT 2 EFFECT 3

EFFECT 5 EFFECT 4

As the number increases, the selected 3D-PHONIC mode becomes stronger.

repeatedly until “– REAR +”
appears on the display.
4. Press MULTI CURSOR @/ #to	MULTI CURSOR
adjust the rear speaker output
level (from –10 to +10).

Note:

From the remote control:

1. Press SOUND CONTROL.

SOUND

CONTROL

You cannot adjust the left and right rear speaker output levels

separately.

The 10 keys are activated for sound adjustments.

2.Press SURROUND repeatedly until “3DACTION” or “3DTHEATR” appears on the display.

SURROUND

3

5. Press MULTI CURSOR %/ Þ

repeatedly until “–EFFECT+”

appears on the display.

MULTI CURSOR

The 3D-PHONIC and PRO LOGIC indicators also light up on the display.

3. Press EFFECT to select an effect	EFFECT
level you want.	45
• Each time you press the button, the effect
level changes as follows:

6. Press MULTI CURSOR @/ #to

select an effect level you want.

• Each time you press the button, the effect

level changes as follows:

MULTI CURSOR

EFFECT 1 EFFECT 2 EFFECT 3
EFFECT 5	EFFECT 4

As the number increases, the selected 3D-PHONIC mode becomes stronger.

EFFECT 1 EFFECT 2 EFFECT 3

EFFECT 5 EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

17