50 electrolux installation instructions
Installation Instructions
Attention: The new appliance may only be installed and connected by a registered expert.
Please comply with this. If you do not, any damage resulting is not covered by the warranty.
Safety information for the installer
•The electrical installation is to be set up so that the appliance can be iso-
lated from the mains with a minimum 3mm all-pole contact separation. Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to be taken out of the holder), RCD’s and contactors.
•Anti-shock protection must be pro- vided by the installation.
•The built-in unit must meet the stabil- ity requirements of DIN 68930.
•Built-in ovens and built-in cooking surfaces are fitted with special con- nection systems. For safety reasons, they must only be combined with ap- pliances from the same manufactur- er.
