Lexmark 19Z4028, 432, 19Z0101, 632, 832 Linking and unlinking trays, Linking trays, Unlinking trays

Loading paper and specialty media 62

Loading letter‑ or A4‑size paper in the short-edge orientation

By default, the printer is set to recognize letter- or A4-size paper loaded in the long-edge orientation. If you want to load letter- or A4-size paper in the short-edge orientation, make sure you enable Short-edge Printing.

1Make sure the printer is off.

2 From the printer control panel, press and hold and 6MNO while you turn the printer on.

3Release both buttons when a progress bar appears on the display.

The printer performs its power-on sequence, and then the Configuration menu appears.

4Press the up or down arrow until Short-edge Printing appears, and then press the arrow to the right of Short-edge Printing.

5Press the left or right arrows until you see Enable, and then press Submit.

Submitting Change appears.

6Press Back.

7Press Exit Config Menu.

Linking and unlinking trays

Linking trays

Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next linked tray. When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked. The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except the multipurpose feeder. The Paper Size setting for the multipurpose feeder must be set manually from the Paper Size menu. The Paper Type setting must be set for all trays from the Paper Type menu. The Paper Type menu and the Paper Size menu are both available from the Paper Size/Type menu.

Unlinking trays

Unlinked trays have settings that are not the same as the settings of any other tray.