Lexmark 632, 432, 19Z0101, 832, X860DE, X862DE, X864DE, 19Z4028, 19Z0202, 19Z0200, 19Z0102 Clearing jams

Troubleshooting 233

84 Photoconductor low

1Press the up or down arrow button until Continue appears, and then press .

2Order a replacement photoconductor immediately. When print quality is reduced, install the new photoconductor.

84 Replace photoconductor

The printer will not print any more pages until the photoconductor is replaced.

Replace the specified photoconductor.

84 Photoconductor abnormal

An unacceptable photoconductor has been installed in the device. Replace the photoconductor.

88 Cartridge low

The toner is low. Replace the print cartridge, and then touch Continue to clear the message and continue printing.

88 Replace cartridge to continue

Replace the toner cartridge.

298.01 Scanner Missing - Cable Unplugged

The scanner was not detected. Make sure the scanner is properly connected.

1565 Emulation error, load emulation option

The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware card.

To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.

Clearing jams

Jam error messages appear on the control panel display and include the area of the printer where the jam occurred. When there is more than one jam, the number of jammed pages is displayed.

Avoiding jams

The following hints can help you avoid jams:

Paper tray recommendations

•Make sure the paper lies flat in the tray.

•Do not remove a tray while the printer is printing.