Lexmark 19Z0200, 432 Understanding printer menus 185, Print Area, Download Target, Job Accounting

Understanding printer menus 185

Menu item

Print Area

Normal

Whole Page

Download Target

RAM

Flash

Disk

Job Accounting

On

Off

Description

Sets the logical and physical printable area

Notes:

•This menu does not appear if Edge to Edge is enabled in the printer Setup menu.

•Normal is the factory default setting. When attempting to print data in the non‑printable area defined by the Normal setting, the printer clips the image at the boundary.

•The Whole Page setting allows the image to be moved into the non‑printable area defined by the Normal setting, but the printer will clip the image at the Normal setting boundary.

•The Whole Page setting only affects pages printed using a PCL 5e interpreter. This setting has no effect on pages printed using the PCL XL or PostScript interpreter.

Sets the storage location for downloads

Notes:

•RAM is the factory default setting.

•Storing downloads in flash memory or on a printer hard disk places them in permanent storage. Downloads remain in flash memory or on the printer hard disk even when the printer is turned off.

•Storing downloads in RAM is temporary.

•This menu appears only if a flash and/or disk option is installed.

Specifies whether the printer stores statistical information about the most recent print jobs on the hard disk

Notes:

•Off is the factory default setting. Off means the printer does not store job statistics.

•The statistics include a record of print errors, the print time, the job size in bytes, the requested paper size and type, the total number of printed pages, and the total number of copies requested.

•Job Accounting is available only when a printer hard disk is installed and working properly. It should not be Read/Write or Write protected. Job Buffer Size should not be set to 100%.

•Changing this setting from the printer control panel and then exiting the menus causes the printer to reset. The menu selection is updated.