Network Reports menu, Network Card menu | Lexmark 632, 432, 19Z0101

Understanding printer menus		145

	Menu item	Description
	Job Buffering	Temporarily stores jobs on the printer hard disk before printing
	Off	Notes:
	On	Notes:
	On	• Off is the factory default setting.
	Auto	• Off is the factory default setting.
	Auto	• The On setting buffers jobs on the printer hard disk.
		• The On setting buffers jobs on the printer hard disk.
		• The Auto setting buffers print jobs only if the printer is busy processing data
		from another input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is updated.

	Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
	Auto	Notes:
	Off	Notes:
	Off	• Auto is the factory default setting.
	On	• Auto is the factory default setting.
	On	• The Off setting filters print jobs using the standard protocol.

		• The On setting processes raw binary PostScript print jobs.

	USB With ENA	Sets the network address, netmask, or gateway information for an external print
	ENA Address	server that is attached to the printer using a USB cable.
	ENA Netmask	Note: This menu item is available only if the printer is attached to an external print
	ENA Gateway	server through the USB port.

Network Reports menu

Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Reports or Network

Reports

Menu item	Description

Print Setup Page	Prints a report containing information about the current network setup
Print NetWare Setup	Notes:
Page	• The Setup Page contains information about the network printer settings, such as the

	TCP/IP address.
	• The NetWare Setup Page menu item appears only on models that support NetWare and
	shows information about NetWare settings.

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Network Card

Menu item	Description

View Card Status	Lets you view the connection status of the Network Card
Connected
Disconnected