Lexmark 19Z0200, 432, 19Z0101 Understanding printer messages, Change input src to Custom Type Name

Troubleshooting 218

Understanding printer messages

An error has occured with the Flash Drive. Please remove and re-insert the drive.

Try one or more of the following:

•Remove and reinsert the flash drive.

•If the error message remains, the flash memory may be defective and require replacing.

Change <input src> to <Custom Type Name>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

•Select the paper tray with the correct paper size or type.

•Touch Use current [src] to ignore the message and print from the tray selected for the print job.

•Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are specified in the printer control panel Paper menu.

Note: If you touch Continue when there is no paper in the tray, the job is not continued.

•Touch Cancel job to cancel the current job.

Change <input src> to <Custom Type Name> load <orientation>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

•Select the paper tray with the correct paper size or type.

•Touch Use current [src] to ignore the message and print from the tray selected for the print job.

•Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are specified in the printer control panel Paper menu.

Note: If you touch Continue when there is no paper in the tray, the job is not continued.

•Touch Cancel job to cancel the current job.

Change <input src> to <Custom String>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

•Select the paper tray with the correct paper size or type.

•Touch Use current [src] to ignore the message and print from the tray selected for the print job.

•Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and type are specified in the printer control panel Paper menu.

Note: If you touch Continue when there is no paper in the tray, the job is not continued.

•Touch Cancel job to cancel the current job.