Lexmark X862DE, 432, 19Z0101, 632, 832, X860DE Understanding printer menus, Menu item, Description

Understanding printer menus		192
	Menu item	Description
	Symbol Set	Specifies the symbol set for each font name
	10U PC‑8	Notes:
	12U PC‑850	• 10U PC‑8 is the US factory default setting.
		• 12U PC‑850 is the international factory default setting.
		• A symbol set is a set of alphabetic and numeric characters, punctuation,
		and special symbols. Symbol sets support the different languages or
		specific programs such as math symbols for scientific text. Only the
		supported symbol sets are shown.
	PCL Emulation Settings	Specifies the font pitch for scalable monospaced fonts
	Pitch	Notes:
	0.08–100
		• 10 is the factory default setting.
		• Pitch refers to the number of fixed‑space characters per inch (cpi).
		• Pitch can be increased or decreased in 0.01‑cpi increments.
		• For nonscalable monospaced fonts, the pitch appears on the display but
		cannot be changed.
	PCL Emulation Settings	Specifies the orientation of text and graphics on the page
	Orientation	Notes:
	Portrait
		• Portrait is the factory default setting.
	Landscape
		• Portrait prints text and graphics parallel to the short edge of the page.
		• Landscape prints text and graphics parallel to the long edge of the page.
	PCL Emulation Settings	Specifies the number of lines that print on each page
	Lines per Page	Notes:
	1–255
		• 60 is the US factory default setting. 64 is the international default setting.
		• The printer sets the amount of space between each line based on the
		Lines per Page, Paper Size, and Orientation settings. Select the desired
		Paper Size and Orientation before setting Lines per Page.
	PCL Emulation Settings	Sets the printer to print on A4‑size paper
	A4 Width	Notes:
	198 mm
		• 198 mm is the factory default setting.
	203 mm
		• The 203‑mm setting sets the width of the page to allow the printing of
		eighty 10‑pitch characters.
	PCL Emulation Settings	Specifies whether the printer automatically performs a carriage return after a
	Auto CR after LF	line feed control command
	On	Note: Off is the factory default setting.
	Off
	PCL Emulation Settings	Specifies whether the printer automatically performs a line feed after a carriage
	Auto LF after CR	return control command
	On	Note: Off is the factory default setting.
	Off