Additional printer setup

33

6Flip the hard disk over, and then press the three posts on the mounting plate into the holes on the system board. The hard disk snaps into place.

7Reinstall the system board.

Reinstalling the system board

Warning—Potential Damage: System board electrical components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

Note: This operation requires a #2 Phillips screwdriver.

1Gently insert the system board into the printer.

1

2

Page 33
Image 33
Lexmark 432, 19Z0101, 632, 832, X860DE, X862DE Reinstalling the system board, Gently insert the system board into the printer