Lexmark X862DE, 432, 19Z0101, 632, 832, X860DE, X864DE, 19Z4028, 19Z0202 manual Installing a memory card

Models: X860DE 19Z0102 X862DE 19Z0200 632 19Z0202 832 X864DE 432 19Z4028 19Z0101

1 311
Download 311 pages 30.04 Kb
Page 27
Image 27
1 Flash memory and firmware card connectors

Additional printer setup

27

3Use the illustration below to locate the appropriate connector.

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

1

2

1 Flash memory and firmware card connectorsInstalling a memory card

2 Memory card connector

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

An optional memory card can be purchased separately and attached to the system board. To install the memory card:

1Access the system board.

Note: This task requires a flathead screwdriver.

2Unpack the memory card.

Note: Avoid touching the connection points along the edge of the card.

Page 27
Image 27
Lexmark X862DE, 432, 19Z0101 Installing a memory card, Flash memory and firmware card connectors 2 Memory card connector