Lexmark 19Z0101, 432, 632, 832, X860DE, X862DE Installing hardware options, Order of installation

Additional printer setup 34

2Replace the cover screws, and then turn them clockwise.

3Tighten the screws firmly.

Installing hardware options

Order of installation

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

Install the printer and any options you have purchased in the following order:

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

•Printer stand or caster base

•2,000‑sheet dual trays and high capacity feeder

•Standard or optional 500‑sheet trays

•Duplex unit

•Printer

CAUTION—POTENTIAL INJURY: The printer weighs more than 55 kg (121 lb), and requires at least four persons or a properly rated mechanical handling system to lift it safely.

For more information on installing a printer stand, caster base, or 2,000‑sheet tray, see the setup documentation that came with the option.