Lexmark 832, 432, 19Z0101, 632, X860DE, X862DE, X864DE, 19Z4028 TCP/IP menu, Menu item, Description

Understanding printer menus		146
	Menu item	Description
	View Card Speed	Lets you view the speed of a currently active network card
	Network Address	Lets you view the network addresses
	UAA
	LAA
	Job Timeout	Sets the amount of time in seconds that a network print job can take before it
	0‑225 seconds	is canceled
		Notes:
		• 90 seconds is the factory default setting.
		• A setting value of 0 disables the timeout.
		• If a value of 1–9 is selected, then the setting is saved as 10.
	Banner Page	Allows the printer to print a banner page
	Off	Note: Off is the factory default setting.
	On

TCP/IP menu

Use the following menu items to view or set the TCP/IP information.

Note: This menu is available only for network models or printers attached to print servers. This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > TCP/IP

Menu item	Description
Activate	Activates TCP/IP
On	Note: On is the factory default setting.
Off
View Hostname	Lets you view the current TCP/IP hostname
	Note: This can be changed only from the Embedded Web Server.
IP Address	Lets you view or change the current TCP/IP Address
	Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
	settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
	support BOOTP and RARP.
Netmask	Lets you view or change the current TCP/IP Netmask
Gateway	Lets you view or change the current TCP/IP Gateway
Enable DHCP	Specifies the DHCP address and parameter assignment setting
On	Note: On is the factory default setting.
Off
Enable RARP	Specifies the RARP address assignment setting
On	Note: On is the factory default setting.
Off