Toshiba 210C manual ADD Paper Symbol, Adding Paper to the Cassettes

2. ADD PAPER SYMBOL

Adding Paper to the Cassettes

When the paper supply in the selected cassette or the large-capacity feeder (optional) runs out, the cassette or large-capacity feeder shown on the display flashes, and the following message appears:

Add paper

Add paper as follows.

1 While pulling up the cassette grip, draw out the cassette carefully until it comes to a stop.

2	Place paper in the cassette.
	- Maximum number of sheets that can be set	Page 2-4

- Fan the paper well before placing it in the cassette.

- Do not add paper above the line indicated on the guide. - Do not use creased, folded, wrinkled or damp sheets of

paper.

Make sure that a gap of approx. 0.5 mm (less than 1 mm in total) is left between the paper and the side guide. If there is no gap, this would cause paper misfeeding.

3 Push the cassette straight in until it comes to a stop. - Be sure to push the cassette fully in.

Limit line

Side guide	Side guide
		9
0.5mm		0.5mm

9-3