Toshiba 210C manual General Precautions, Handle and use the copier gently and carefully

2. General Precautions

1 Handle and use the copier gently and carefully.

• Do not place anything on the paper cassettes or the original feeding tray.

• Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur.

• Do not allow any metal items such as paper clips to fall into the copier.

2 Be sure to turn OFF the power switch (unless using the weekly timer mode):

• When you leave your office at night.

• If a power failure occurs.

Caution: When turning OFF the power switch, be sure to do so only after the machine cycling has come to a complete stop.

Be sure to disconnect the power-cord plug:

• When you do not intend to use the copier for an extended period of time.

Be sure to turn OFF the power switch immediately and call for service:

•If an unusual noise is heard from the copier.

•If the outside of the copier becomes unusually hot.

•If any part of this copier is damaged, or if it has been dropped.

•If the copier has been exposed to rain or liquid.

3 It is recommended that only supplies made or designated by Toshiba be used for the e-STUDIO210c/310c in order to optimize copy quality. All supplies should be stored in a cool, dry area.

For optimum performance, it is recommended that 80 g/m2 xerographic bond paper of high quality be used. Paper of lower quality may contain inherent properties such as excess paper dust and may lead to premature servicing.

4 Do not apply force or place heavy objects (4kg or more) on the original glass. Break- ing the glass may cause personal injury.

5 Do not place heavy objects on the copier. They may fall and injure you.

WARNING: DO NOT LEAN ON, APPLY FORCE OR PLACE HEAVY OBJECTS ON THE FINISHER. PERSONAL INJURY OR PROPERTY DAMAGE MAY RESULT.

Machine Noise Information

Ordinance3. GSGV, January 18, 1991: The maximum sound pressure level is equal to or less than 70dB(A) according to EN27779.

9