HP B132L, B160L, B180L manual Also, read the ESD Precautions in Appendix a of this guide

Changing Your Workstation’s Hardware Configuration

This appendix describes the procedures to change your workstation’s hard- ware configuration. It presents the information in the following sections:

•Checking the SCSI IDs

•Preparing your workstation

•Removing the main tray assembly

•Replacing the main tray assembly

•Installing storage devices

•Installing additional memory

•Installing cache boards

•Installing an EISA, GSC, or PCI option board

•Installing an optional System Graphics RAM (EGRAM) board

•Changing your monitor type

CAUTION:Always wear a properly grounded wrist strap when reconfiguring your workstation.

Use the following tools to remove or replace hardware parts when changing your configuration:

•Light-duty flat blade screwdriver with 150 mm (6 in.) blade

•Needlenose pliers

•Torx screwdriver

Also, read the ESD Precautions in Appendix A of this guide.

106