Using Your CD-ROM Drive

Operating the CD-ROM Drive

Unloading a CD-ROM Disc in a Horizontally Mounted Drive

Perform the following steps to unload a disc from the CD-ROM drive:

Figure 6

Removing a CD-ROM Disc From a Horizontally Mounted Drive

1Press the eject button to eject the disc tray from the drive. If the drive is in use, you must press the eject button for more than one second to eject the disc tray.

NOTICE:You must unmount the disc before eject it from the drive. Refer to the subsection, “Unmounting a CD-ROM Disc Using SAM,” for instructions on unmounting a disc.

2Wait until the drive has fully ejected the disc tray. Be sure the disc holders are held away from the disc by the disc holder retainers, Then remove the disc from the tray as shown in Figure 6. Be careful to touch only the edges of the disc.

3To close the Disc Tray, push the front of the disc tray gently towards the drive until it closes by itself.

35