HP B132L, B160L Important Information You Need to Record, You will see a table similar to Table

System Overview

Important Information You Need to Record

Important Information You Need to Record

Before you begin using your workstation, take a moment to gather the fol- lowing important information and note it in the appropriate subsection for future use:

•LANIC ID

•SCSI device ID(s)

•Device file used for each SCSI device

•Internet Protocol (IP) address

•Subnetwork mask

NOTICE:For help with these, refer to Using your HP Workstation.

LANIC ID

Locate the contents label that comes with the workstation shipping carton. Find the LANIC ID listed there and write it down in the space provided:

LANIC ID ____________________________________________

You can also get your LANIC ID by using the lanscan command in a termi- nal window. To do this, follow these steps:

1Turn your workstation and monitor on, if you have not already done so. Figure 1 of this chapter shows the location of the power switch on the workstation. See the documentation that came with your monitor for the location of the monitor power switch. Boot the HP-UX operating system.

2In a terminal window, enter the following at the prompt:

/usr/sbin/lanscan

You will see a table similar to Table 3.

22