Kompernass KH 2356 manual Coupling the headset with a mobile phone

Coupling the headset with a mobile phone

The headset was specially developed for mobile telephones, which support the Bluetooth Profile "Handsfree (HFP) and Headset (HSP)". Further information about Bluetooth radio technology is to be found in the operating instructions for your mobile telephone. Before you can use the headset you must couple it with a compatible mobile telephone (Pairing).

•Check to make sure the mobile telephone is switched on.

•Programme the mobile telephone so that it searches for Bluetooth devices. A detailed description of how to do this is to be found in the operating instructions for your mobile telephone.

•Make sure that the headset is charged and switched off.

•Place the headset and mobile telephone so that they are not more than 1 meter apart.

•Press and hold the Multi function button for 8 seconds until you hear a short high signal tone and the LED status indicator lights up with alternating yellow and blue lights. The headset is now in coupling mode.

•Select the input "BT Headset" from the list of available devices in the mobile telephone.

•Enter the pre-programmed code "0000" and confirm it to couple the devices together. This mobile telephone now becomes the default telephone for the headset. You hear a high double tone and the LED status indicator blinks blue every 3 seconds. The headset is now in standby mode.

•You can now use the headset.

Note:

If the coupling is not completed within 2 minutes switch the headset off. The LED status indicator goes out and you hear a deep signal tone.

- 53 -