HP B160L, B132L, B180L manual Installing a Hard Disk Drive in Position 2 Front Position

Changing Your Workstation’s Hardware Configuration

Installing Storage Devices

3Align the four feet on the bottom of the disk drive carrier with the square holes in the storage tray, as shown in Figure 35.

Figure 35 Installing a Hard Disk Drive in Position 2 (Front Position)

4Set the drive in the storage tray.

5Connect the power connector and the appropriate SCSI connector to the drive.

6Push the drive toward the rear of the tray until the locking tab on the drive carrier snaps into place, as shown in Figure 35.

128