HP B160L, B132L, B180L manual Unloading a CD-ROM Disc in a Vertically Mounted Drive

Using Your CD-ROM Drive

Operating the CD-ROM Drive

Unloading a CD-ROM Disc in a Vertically Mounted Drive

Perform the following steps to unload a disc from the CD-ROM drive:

Figure 9 Removing a CD-ROM Disc From a Vertically Mounted Drive

1Press the eject button to eject the disc tray from the drive. If the drive is in use, you must press the eject button for more than one second to eject the disc tray.

NOTICE:You must unmount the disc before eject it from the drive. Refer to the subsection, “Unmounting a CD-ROM Disc Using SAM,” for instruction on unmounting a disc.

2Press down gently against the spring tension of disc holders A and B and swing the top of the disc away from disc holders C and D as shown in Figure 9.

3Remove the disc from disc holders A and B.

4To close the Disc Tray, push the front of the disc tray gently towards the drive until it closes by itself.

38