HP B180L, B132L, B160L manual Removing the Main Tray Assembly, Removing Main Tray Assembly

Changing Your Workstation’s Hardware Configuration

Removing the Main Tray Assembly

Removing the Main Tray Assembly

Perform the following steps to remove the Main Tray Assembly:

1Shutdown and prepare the workstation as described in Preparing Your Worksta- tion earlier in this appendix.

2Disconnect all cables and connectors from the front and rear connectors of the system unit.

3Attach a static-grounding wrist strap to bare metal on the back panel of the system unit.

4Remove the four thumbscrews on the rear of the system unit, as shown in Figure 21.

Thumbscrews

Thumbscrews

Figure 21 Removing Main Tray Assembly

5Place one hand on the top of the system unit and push, while pulling the handle on the rear panel with your other hand. See Figure 21.

6Slide the main tray assembly out of the chassis.

111