HP B132L, B160L, B180L manual Changing the Console to External Terminal

Changing Your Workstation’s Hardware Configuration

Changing Your Monitor Type

The system queries you to save the new monitor type. If the monitor type displayed is correct, press Y to save this monitor type.

MONITOR INFORMATION
Path	Slot Head Type	Size	Freq Class

-------- ---- ---- --------- ---- -----

GRAPHICS(0)		0	1	12 1280x1024 72Hz
This is type	12 of 15 types.
Press [RETURN] to		select this monitor type:
Press [y] to	save	this monitor type:

If this is not the correct monitor type, press any other key to continue the search.

Changing the Console to External Terminal

In the event that your console stops displaying to your graphics device, use the following procedure to display to console to an external terminal:

1Turn system power off.

2Disconnect the PC keyboard connector from the system rear panel.

3Connect a serial terminal to the Serial 1 connector (the top serial connector) on the system rear panel.

4Power on the system.

The system will now display the console to the terminal connected to the Serial 1 port.

169